Thursday, June 4, 2020
- Advertisement -
Speed up your site performance today, Free site transfer, same renewal price

3D Printing of Nonplanar Layers for Smooth Surface Generation

Nonplanar Printing The Nonplanar Slicing was started in 2018 with a Master thesis. The general idea is to remove the stair-stepping effect on surfaces that are close to horizontal by printing these areas with nonplanar layers. With this approach, the printable areas are detected automatically and checked for possible collisions while printing. The area below…

Home 3D metal printing: first results

Home 3d metal printing: first results Mon 12 August 2019 Tagged: 3dprinting, science A couple of weeks ago I learnt about an interesting 3d metal printing process, from a company selling it for $100k USD, and speculated that it might be DIY-able for much less. Well I now have some promising first results. TL;DR is…
Printing vaccines at the pharmacy or at home will be the way of the future

Printing vaccines at the pharmacy or at home will be the way of the...

PC LOAD PROTEIN — Op-ed: Our current model of manufacturing stockpiles won't work against bioterror or superbugs. Andrew Hessel - Jun 20, 2019 5:55 pm UTC Enlarge / Artist's impression of a vaccine printer.Getty / Aurich LawsonWe're running a series of companion posts this week to accompany our special edition Ars Lunch Break podcast. This…

APPLICATIONS

Airbus A350 software bug forces airlines to turn planes off and...

Patch your darn metal bird, sighs EU aviation agency An Airbus promotional picture of an A350-1000. Its sister type, the A350-941, is the affected model of airliner Some models of Airbus A350 airliners still need to be hard rebooted after exactly 149 hours, despite warnings from the EU Aviation Safety Agency (EASA) first issued two…

HOT NEWS

Skip to toolbar